TeleVev©

Les géotextiles polyester tissés TeleVev® sont destinés au renforcement et au confinement des sols. Nos géotextiles sont constitués de fil de polyester multifilaments haute résistance.


Tele Textiles propose une large gamme de textiles TeleVev® offrant une résistance élevée pour un faible allongement.

Grâce aux propriétés du polyester, TeleVev® offre d'excellentes caractéristiques de résistance au fluage et aux dommages mécaniques, ainsi qu'aux dégradations occasionnées par les UV et les produits chimiques et biologiques. Les textiles TeleVev® offrent de bonnes propriétés de friction pour tous les types de matériaux de remblai courants.

Le TeleVev® est particulièrement adapté à une utilisation sous des charges extrêmement élevées et des matériaux grossiers (remblais et talus rocheux). Il confère un grand avantage lorsqu'un renforcement haute résistance et un confinement sont nécessaires.


TeleVev® est utilisé dans le monde entier pour le renforcement des sols et est présent dans de nombreuses applications :

-       murs en sol renforcé,

-       t alus escarpés,

-       m urs de soutènement,

-       chemins de fer et renforcement du sous-sol des aéroports.

 



TeleVev© Gallery

TeleVev© Download

Road reinforcement

When building a road or a runway on a poor loaded capacity soil, reinforcement is necessary. Several alternatives exist to consolidate the subsoil. Among them, geosynthetics are widely use, mainly thanks to their cost efficiency and easiness of installation.


Our geosynthetics, TeleVev® and TeleGrid®, are aimed to reinforce the subsoil. Their mains advantages are:
• The possibility to build on poor load bearing capacity soils
• Cost-effective
• Speed of installation En aplicaciones de refuerzo de asfalto, Tele Road® está diseñado para:
• Reforzar el estrato superior del asfalto
• Prolongar la vida del pavimento
On asphalt reinforcement application, Tele Road® is designed to:
• To reinforce the upper layer of the asphalt
• Extend the pavement life
Go to Solutions for Road reinforcement

Railway reinforcement

Every time a railway or even a runway is to be built on a poor load capacity soil, reinforcement is necessary to consolidate it.


Many techniques exist to consolidate the settlement but the easiness of installation and the lower cost make the use of Tele Textiles solutions the most effective solution. The main advantages of our solutions TeleVev©, TeleGrid© are:

• To reduce maintenance costs,
• The ability to build railways on weak soils,
• To increase the lifetime of the railway.

Go to railway reinforcement solution


Retaining walls reinforcement

Traditionally, retaining walls have been constructed with concrete or masonry facing, to resist lateral pressure from the soil and the water pressure. By using the principle of reinforced soil the wall can be constructed without external support. Reinforced retaining walls may be built with an inclination up to 90°. The activation of the reinforcement results in a small lateral displacement of the structure.


The facing has therefore a surface protective and an aesthetical purpose.

Parameters such as the height of the wall, the type of filling materials and subsoil, will determine the type of TeleGrid or TeleVev to install on the wall.

Go to Retaining walls reinforcement solution

Land reclamation

Land reclamation is the creation of land where there was once seas or rivers, in order to increase building, infrastructures areas as well as harbor land reclamation schemes. Level of the reclaimed land is above the sea as opposed to polder or “water management units” whose soil is under sea level


The nature of the subsoils in such applications is very weak and need to be reinforced. On most of the projects stones are used to increase the bearing capacity of the structures to be built. The use of a separation and reinforcement layer on the sea-bed will increase the life time of the installations

Tele Textiles offers TeleVev whose very high CBR figures give the possibility to withstand large crushed stones.

Go to land reclamation solution

Embankments

Reinforcement for embankment bases on soft subsoil is used to increase the safety against underground failure and to reduce the differential settlement of the underground. Embankments are typically constructed with edge slopes of 1:2 to 1:3. Edge slopes may be steepened by using reinforcement.


Due to the horizontal earth pressure in the embankment, shear stress will be mobilized between the embankment and the underground.

Reinforced embankments may be constructed using different kinds of fill materials and in combination with other stabilizing techniques. Geosynthetic reinforcement is frequently used for piled embankments on soft subsoil. The piles may be wooden, steel or concrete pre-made piles or mixed-in-place columns (lime-cement columns). The reinforcement function in this application is to transfer the vertical loads from the embankment to the piles and to oppose the lateral forces from lateral earth pressure in the fill.

Tele Textiles offers you woven geogrids TeleGrid® and high tenacity woven polyester geotextiles TeleVev® for such applications.

Go to embankments solution

Slope reinforcement

Reinforcement in slopes or steep banks may be used for different purposes. The reinforcement is used to build with a steeper slope than what is possible when using natural fill materials. Since natural fill masses may common¬ly be constructed with a natural inclination, reinforced slopes commonly have a steeper inclination.


Basically the design concept of a reinforced steep slope is similar to that used for reinforced retaining walls. The purpose of the reinforcement is to take care of the lateral earth pressure in the soil and to “tie back” the potential failure wedge in front of the potential ultimate failure plane.

TeleVev® and TeleGrid® can be used in such applications.

Go to slope reinforcement solution

Pipe protection

Landfill A large number of pipes are installed on the seabed. Boat turbines erode the seabed and as a consequence erosion occurs around the pipes. One efficient means of protection is to cover them with a FlexiTex® layer, often a 10-13 cm thickness of concrete.


The installation of that concrete mattress needs to be done in the correct way so that it is not possible for any current to get beneath the mattress. Our engineers can advise on the impact of local conditions such as hydraulic currents, depths and types of seabed on the installations required.

Very often by using mattresses between the pipe and FlexiTex®, the pipe will also be protected against mechanical damage.

Go to pipe protection solution